Stainless steel submersible sewage pump usage conditions
1. This sewage pump series is suitable when the rated voltage is 380V and the power frequency is 50Hz.
2. The medium temperature does not exceed 40 degrees Celsius, the medium density is ≤1150kg/m3, and the PH value is within the range of 5-9;
3. The altitude does not exceed 1,000 meters;
4. The annual viscosity of the conveying medium does not exceed 1000CP;
5. The product must be submerged in water when operating, but the diving depth shall not exceed 10m;
6. The product material is mainly cast iron and cannot be used in highly corrosive or highly corrosive media;
Note: Before selecting or installing the pump, be sure to make sure that the actual operating conditions of the pump comply with the above terms to ensure the correct use of the product!
WQP stainless steel submersible sewage pump product features
1. Using advanced technology, it has strong sludge discharge capacity, no clogging, and can effectively pass through solid particles with a diameter of 30 to 60 mm.
2. The tearing mechanism can tear and cut the fibrous material, and then discharge it smoothly without adding a filter to the pump.
3. The submersible sand suction pump is reasonably designed, the supporting motor has small power, and the energy saving effect is significant.
4. The mechanical seal using the latest materials allows the pump to operate safely and continuously.
5. The sand suction pump uses a mechanical seal made of the latest materials, which allows the pump to operate safely and continuously.
6. It can be used in the whole head range without ensuring that the motor is overloaded.
