The main components of WQ type submersible sewage pump are composed of impeller, pump body and base submersible motor. The water pump and the motor are on the same shaft. Since the water pump is located at the bottom of the whole sewage pump, it can suck up the residual sewage on the ground to the maximum extent. The impeller is designed with double channels, which greatly improves the flow capacity of the dirt, and can effectively pass solid particles whose diameter is 50% of the pump caliber.
WQ submersible sewage pump has the characteristics of remarkable energy-saving effect, anti-winding, non-clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long fiber waste. This series of pumps adopts a unique impeller structure and a new type of mechanical seal, which can effectively transport solids and long fibers. Compared with the traditional impeller, the impeller of the pump adopts the form of single flow channel or double flow channel, which is similar to an elbow with the same cross-sectional size and has very good flow performance. With a reasonable volute chamber, the pump has high efficiency. The height and the impeller have passed the dynamic and static balance test, so that the pump has no vibration during operation.
WQ type submersible sewage pump is used in the discharge of heavily polluted wastewater from factories and businesses, the sewage sewage station in residential areas, the drainage system of urban sewage treatment plants, the drainage station of civil air defense system, the water supply device of waterworks, the sewage discharge of hospitals and hotels, and the construction of municipal engineering. Construction sites, exploration, mine supporting machinery, rural biogas digesters, farmland irrigation and other industries, conveyor belt particles of sewage, dirt, can also be used for clean water and corrosive media.
There are two common installation methods for submersible sewage pumps:
1) Coupled installation;
The coupled installation is to connect the pump to the pipeline through a coupler, and it is convenient to separate the pump from the outlet pipeline, and the pump can be lifted by the lifting device when it is overhauled. Coupling installation is suitable for submersible sewage pumps of various specifications, and is the most commonly used installation method for submersible sewage pumps. The coupler is supplied by the equipment manufacturer as a complete set.
2) Mobile installation;
Mobile installation means that the pump outlet pipeline is directly connected to the water surface through a hose, and the submersible sewage pump is reset at the bottom of the pool by itself or suspended on a lifting device through iron chains. The mobile installation does not need to be fixed by the coupler and the bottom of the pool, so it is easy to move, and it can be lifted together with the pipeline during maintenance. At the same time, due to the installation method, it is difficult to bear a large moment, so it is only suitable for small submersible sewage pumps
Hot Tags: submersible sewage pumps, China submersible sewage pumps manufacturers, suppliers, factory, submersible drainage sump pump, large sewage pump, high head sewage pump, high pressure sewage pump, sewage water submersible pump, centrifugal sewage pump
